Abrasive Blasting Pot Tending Quiz

Time limit: 0

Quiz Summary

0 of 20 questions completed

Questions:

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20

Information

You have already completed the quiz before. Hence you can not start it again.

Quiz is loading…

You must sign in or sign up to start the quiz.

You must first complete the following:

Results

Quiz complete. Results are being recorded.

Results

0 of 20 questions answered correctly

Your time:

Time has elapsed

You have reached 0 of 0 point(s), (0)

Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)

Categories

Not categorized 0%

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20

Answered
Review

Question 1 of 20

1. Question
- On flat ground
- Upwind or sidewind of the job
- Far enough from blasting area to prevent damage
- Close enough to blast area to work efficiently
- All of the above
Correct

Incorrect
Question 2 of 20

2. Question
- Hide
- Flag off
- Announce
- Show people
Correct

Incorrect
Question 3 of 20

3. Question
- Whip checks and safety pins
- Hose gaskets in good condition
- Couplers in good condition
- All of the above
Correct

Incorrect
Question 4 of 20

4. Question
- Replace quietly
- Ask someone else to deal with it
- Ignore it unless damage is really bad
- Replace and report to supervision
Correct

Incorrect
Question 5 of 20

5. Question
- 10
- 25
- 50
- 80
Correct

Incorrect
Question 6 of 20

6. Question
- Check by breathing in the air
- Make sure the is a CO monitor in place
- Trust that this was taken care of beforehand
- Use a canary to test the air.
Correct

Incorrect
Question 7 of 20

7. Question
- As close to the blast pot as possible
- As far away from the blast pot as possible
- As close to the compressor as possible
- As far away from the compressor as possible.
Correct

Incorrect
Question 8 of 20

8. Question
- Clean out the abrasive trap
- Fill the blast machine with blast media
- Verify manual control valve is turned to the OFF position.
- Verify that the choke valve on the pusher line is turned ON.
Correct

Incorrect
Question 9 of 20

9. Question
- Plunger
- Choke valve
- Cover
- Air Filter
Correct

Incorrect
Question 10 of 20

10. Question
- Call a supervisor
- Immediately leave the area
- Immediately turn off manual control at blast machine
- Immediately unhook hose
Correct

Incorrect
Question 11 of 20

11. Question
- Two fingers pointing down
- Two fingers pointing up
- Thumb pointing down
- Thumb pointing up
Correct

Incorrect
Question 12 of 20

12. Question
- Making sure there is a clear path for the blaster.
- Assisting blaster with access
- Managing hoses as blaster moves
- Leaving to get any necessary supplies
- Maintaining a tidy work area
Correct

Incorrect
Question 13 of 20

13. Question
- Doing it as quickly as possible
- Lifting as much at a time as you can
- Filling it past the plunger
- Ensuring a screen is in place to prevent unwanted objects from entering the machine
Correct

Incorrect
Question 14 of 20

14. Question
- True
- False
Correct

Incorrect
Question 15 of 20

15. Question
- Dust
- Mold
- Condensation
- Contusions
Correct

Incorrect
Question 16 of 20

16. Question
- True
- False
Correct

Incorrect
Question 17 of 20

17. Question
- Roll up blast hose and breather hose
- Bleed off air pressure
- Disconnect control line
- Repair hoses
Correct

Incorrect
Question 18 of 20

18. Question
- True
- False
Correct

Incorrect
Question 19 of 20

19. Question
- True
- False
Correct

Incorrect
Question 20 of 20

20. Question
- Hose, One
- Nozzle, Three
- Abrasive Trap, Two
- Air Purifier, Five
Correct

Incorrect

Quiz Summary

Information

Results

Results

Categories

1. Question

2. Question

3. Question

4. Question

5. Question

6. Question

7. Question

8. Question

9. Question

10. Question

11. Question

12. Question

13. Question

14. Question

15. Question

16. Question

17. Question

18. Question

19. Question

20. Question