Abrasive Blasting Protecting Surfaces Quiz

1. Perform a _______with client or foreman and review the scope of work to identify which
items will need protecting.

2. When possible, use plastic or coverings that allow _______ use of masking tape.

3. Tape will _______ if temperatures are too hot.

4. Discuss with the client if there is any hardware that may be removed.

5. It may be cheaper / easier to _______ smaller items rather than masking them

6. _______ of the work area will allow for easy placement of the removed hardware.

7. Any removed hardware should be stored onsite in a(n) _______ way.

8. Verify ________ and mask any items ________ of the paint area.

9. Do not open or close valves when removing devices.

10. When covering items, how should you run the tape?

11. Do not cover any __________ or areas such as air intakes that could hinder the
operation of the equipment.

12. If moving items require masking, make sure they are shut off and locked out.

13. Prior to blasting,

14. What is the most commonly used tape for masking for abrasive blasting?

15. Why should you handle and store the tape carefully?