Masking for Coating Quiz

The following tools and supplies may be required: (check all that apply)

Perform a _______ with the client or foreman and review the scope of work to identify which items will need protecting.

When possible, use __________ that allow minimal use of ______ to drastically increase production.

Tape and plastic will bond to the equipment if temperatures are too cold

It may be cheaper / easier to _______ smaller items rather than masking them

_______ of the work area will allow for easy placement of the removed hardware.

Any removed hardware should be stored onsite in a(n) _______ way.

Verify wind direction and mask items _______ of the paint area

Do not open or close valves.

When covering items, how should you run the tape?

Do not cover any __________ or areas such as air intakes that could hinder the operation of the equipment.

If moving items require masking, make sure they are shut off and locked out.

Prior to spraying:

Always cut _____ the body when using a utility knife.

__________ tape has less adhesive strength but allows for cleaner removal.

__________ tape has better adhesive strength, but can be difficult to remove, especially
when exposed to heat or sunlight.

Masking tape is available in different widths.

Why should you handle and store the tape carefully?

When any type of tape freezes, the adhesive on tape will work even better.