Preconditions
Tools/Equipment
The following equipment will be required:
Hard hat Safety glasses Steel toe boots Gloves Hearing Protection (if needed)
The following tools and supplies may be required:
Paper Plastic Tarps/ Drop cloths Tape (Masking & Duct) Utility Knife Scraper
Requirements
Requirements for this guideline include:
Qualified Mandros Painting personnel Job Safety Analysis (JSA) Equipment Inspection PPE and Hazard Assessment Notification of all parties involved
Hazards
The following hazards may be present:
Cuts Slips, trips, and falls Pinch Points Environmental conditions (heat, cold, wind, etc.) Site specific hazards (these should be identified during JSA)
References
Manufacturer’s manuals and related documents
Refer to the following materials for detailed information about this task: MPI Safety Manual Client specifications and job scope