Quiz Summary
0 of 20 questions completed
Questions:
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
Information
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading…
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Results
0 of 20 questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- Answered
- Review
-
Question 1 of 20
1. Question
When setting up the work area, ensure equipment is _________ or _________.
CorrectIncorrect -
Question 2 of 20
2. Question
Always verify that:
CorrectIncorrect -
Question 3 of 20
3. Question
It is important to ensure there is always a fire extinguisher in the area.
CorrectIncorrect -
Question 4 of 20
4. Question
Verify there are ___________ under mix area, spray area, or paint pot staging
area to prevent spills.CorrectIncorrect -
Question 5 of 20
5. Question
It is okay for the pot pressure to occasionally exceed the maximum working
pressure of the paint pot.CorrectIncorrect -
Question 6 of 20
6. Question
When inspecting spray equipment, check for the following (circle all that apply)
CorrectIncorrect -
Question 7 of 20
7. Question
What must you do before turning ON the air compressor to flush the spray
equipment?CorrectIncorrect -
Question 8 of 20
8. Question
When flushing the equipment, approximately what PSI should you use?
CorrectIncorrect -
Question 9 of 20
9. Question
When managing materials, ensure they are stored in a ________ and _______
location.CorrectIncorrect -
Question 10 of 20
10. Question
When loading the spray pot, strain the mixed paint into the paint pot no more
than ____ full.CorrectIncorrect -
Question 11 of 20
11. Question
Why is it important to ensure thumb screws and clamps are situated and tightened properly?
CorrectIncorrect -
Question 12 of 20
12. Question
What must you adjust to get a good paint pattern?
CorrectIncorrect -
Question 13 of 20
13. Question
What does the fan adjusting screw on the gun do?
CorrectIncorrect -
Question 14 of 20
14. Question
Always depressurize pot prior to moving or filling.
CorrectIncorrect -
Question 15 of 20
15. Question
It is not your job to assist the painter in the process. Only manage the pot.
CorrectIncorrect -
Question 16 of 20
16. Question
When should you clean the spray gun with solvent?
CorrectIncorrect -
Question 17 of 20
17. Question
What is the first step when cleaning the spray pot and gun?
CorrectIncorrect -
Question 18 of 20
18. Question
CorrectIncorrect -
Question 19 of 20
19. Question
When cleaning up the site, hoses must be_______.
CorrectIncorrect -
Question 20 of 20
20. Question
Where should you store painting equipment?
CorrectIncorrect